Auto Paint How To: A Basic Guide

Automobile Paint The best ways to: A Standard Guide

WSC2011_Skill13_BB-8494
Source: Flickr


Whether you are simply interested in re-spraying a small location to cover some paint chips, or wish to treat your automobile to a custom paint job that will let you enjoy jealous stares from every pedestrian you pass, you will need to follow a few basic guidelines, and have the right tools to hand in order to perform the work to a high standard.

The first thing to point out about car paint jobs is that you should always operate in a well ventilated area. Paint fumes can include a variety of solvents that can leave you feeling light headed as well as poison you if you inhale them, so see to it there is free passage of air through your work shop when you are painting. You must also wear a respirator mask throughout painting or preparation to prevent breathing in any paint and loose dust that you release.

To obtain the very best effects when painting, you likewise have to ensure that you are able to keep dust to a minimum. You can achieve an excellent environment by hanging sheets from floor to ceiling in the area where you are working, and using overalls. You ought to also vacuum clean the area where you are painting at the beginning of every session.

When you apply car body paint, the main thing is to get a great even complete that looks great, and the key to obtaining an excellent finish is having a good start. Prep work is everything in paining. Get it right, and you will have the ability to take pleasure in a fantastic smooth finish that will last for several years and look great, skimp on your prep work, and your finish will look shabby straight away, and then become worse in time.

Before you repaint, you have to remove off the old paint task. You can do this with a solvent based paint remover, or do it the difficult way by sanding back the panels to bare metal utilizing a sander. Whichever approach you pick, you need to ensure that you have a really smooth base. To achieve this, utilize the finest grade abrasive paper readily available, and be prepared to put severe time into the job.

When you are pleased with your base, you can begin applying the guide. Utilize a HLVP spray weapon connected to an air compressor, as this is a lot more even than an aerosol, and will be more affordable in the long run. You ought to use long sweeping strokes in a single direction to obtain an excellent base to paint onto. After every coat, permit the paint to dry, and then sand it back to a smooth surface area. Then apply the next coat in strokes that go at 90 degrees to the previous layer, as this will produce an even color.

There are 2 kinds of auto paint that you can make use of on an automobile, cellulose based and 2 Load car paint. The majority of painters now use 2 Pack because it gives a much better surface, and metallic colors are offered, whereas cellulose paint can be challenging to deal with, and is best used on vintage cars where you are trying to recapture an older style.

As with the guide, you ought to apply the auto paint in coats, spraying in a single direction, then sanding back to a fine surface area to eliminate any blemishes, prior to applying the next layer at ideal angles to the previous one.

In between coats, it is imperative to clean the nozzles on your HVLP spray gun, as otherwise, little flakes of dried paint can be captured up in the spray and cause imperfections that will spoil the final impact.

As soon as you are satisfied that you have got an excellent covering and used enough coats of auto body paint to produce an exceptional surface, apply one more coat for finest results, permit it to dry, and then sand back for a smooth finish. You should leave the paint to dry completely for 24 hours and after that use a wax polish to the whole body in order to secure your brand-new paint job and provide it a luster that will certainly capture the interest of anyone you pass on the road.